Posted by heiha
<p>The tube slopes slightly (1–4°) and slowly rotates on its axis at between 30 and 250 revolutions per hour. Rawmix is fed in at the upper end, and the rotation of the kiln causes it gradually to move downhill to the other end of the kiln. At the other end fuel, in the form of gas, oil, or pulverized solid fuel, is blown in through the "burner pipe", producing a large concentric flame in the lower part of the kiln tube. As material moves under the flame, it reaches its peak temperature, before dropping out of the kiln tube into the cooler. Air is drawn first through the cooler and then through the kiln for combustion of the fuel. In the cooler the air is heated by the cooling clinker, so that it may be 400 to 800 °C before it enters the kiln, thus causing intense a
Posted: 10:05 pm, December 24th, 2013 in New York City
0 Comments | RSS comments feed for this topic
No tags yet.
You must log in to post.
Home | Forums | About | Contact | Advertise | RSS Feeds
Powered by bbPress and WordPress MU | © 2017 Midtown Lunch